भाषा बदलें
हमें कॉल करें08045479132

हमारे पास प्रयोगशाला उपभोग्य सामग्रियों की रेंज का एक आश्चर्यजनक दायरा है जो विशेष रूप से उपभोज्य अनुप्रयोगों के लिए तैयार किया गया है। हमारा व्यवसाय सटीक और सटीक आकलन के लिए एक्सपेंडेबल पिपेट, रिसेप्टिकल्स, चैनल और टेस्ट ट्यूब से लेकर लैब में सुरक्षा के लिए डिस्पेंसेबल दस्ताने और फेसमास्क तक का विस्तृत चयन प्रदान करता है। एक्सपेंडेबल उदाहरण कम्पार्टमेंट इसी तरह कई उपयोगी शैलियों और आकारों में उपलब्ध हैं। हमारी अधिकांश लैब उपभोग्य वस्तुएं शानदार सामग्रियों से बनी हैं और विभिन्न प्रयोगशाला क्षेत्रों और अनुप्रयोगों में सहायक हो सकती हैं, फिर भी एकान्त अनुप्रयोगों के बाद लाभप्रद रूप से त्यागने और फिर से स्टॉक करने के लिए पर्याप्त रूप से विवेकपूर्ण हैं।

Slide Mailer Radical

Radical Slide Mailers presents the best option to carry prepared slides form one place to another. Moulded in Polypropylene, these Slide Mailers are available in four sizes.

Desiccator (plain)

Plain desiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.

CARBOY with stop cock

Material : PP Material Conforming to USA FDA

DESICCATOR (VACCUM)

Radical Desiccators are made of polypropylene and polycarbonate. These autoclavable vaccum desiccators can hold vaccum upto 740mm. of Hg for 24 hrs. without any greasing.

परमाणु मॉडल सेट

अधिकांश पदार्थों में अणुओं का एक समूह होता है जिन्हें अपेक्षाकृत आसानी से अलग किया जा सकता है।

DROPPING BOTTLES

These bottles made in low density polythylene with PP caps. Dispense small uniform drops of variety of liquids.

carboy with wide handle

Ideal for storing & transporting distilled water, Culture media & other laboratory solutions.

WASH BOTTLES

Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable.

Coplin Jar Polypropylene

Radical Coplin Jar made of Polypropylene can hold 10 slides of size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

Slide Box

These Slide Boxes are durable, compact & provide most protection to 1"x3" slides. Heavy walls will not wrap, splinter or crack. Boxes are unaffected by humidity and are throughly insect proof. Base of the slide box has a numbered index for easy idenditication.

Slide Tray

Moulded in high impact polystyrene this slide tray is an excellent option for holding upto 20 microscopic slides at an angle for easy handling. Placement of slides has been designed in such a way that slides remain protected even when the trays are stacked.

Slide Draining Tray

This slide draining tray moulded in ABS has numeric indexing for easy identification of the slides. Spacing between the slots provide adequate backward & forward movement of the slides and permits two slides per slot thus providing storage for upto 200 slides.

PCR Tube Rack with Hinges - Autoclavable

These autoclavable PCR tube racks can accommodate individual 0.2ml. PCR tubes and strips, have hinged lid and alphanumeric identification for quick location and retrieval of tubes. These racks are perfect for pre or post PCR sampling.

MCT Box

MCT Boxes are moulded in polycarbonate and are therefor strong as well as autoclavable.

Rotatable Multi Rack

1st side - 2 wells with diameter 30mm for 50ml. tubes 2nd side - 10 wells with diameter 13.5mm for 10-13ml. tubes 3rd side - 8 wells with diameter 20mm for 10-15ml. tubes 4th side - 6 wells with diameter 16.0mm for 15-20ml. tubes

Measuring Cylinder Hexagonal

Radical Measuring Cylinders moulded in polypropylene are single piece cylinders. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.

Scoop PP

Radical Scoops are excellent replacement for metallic ones. Moulded in polypropylene, these scoops are autoclavable and completely eliminate the danger for rusting or corrosion.

Draining Lab Rack

Radical Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
X


Back to top